KidKraft Rising City Train Table And Set

KidKraft Rising City Train Table And Set ()I'm not going to lie to you; this thing was a BEAR to assemble. If you are a "viner" or other customer, I am going to point out a few things that I hope will help. First of all, you might want to do it on a weekday. Their Customer Service is open Monday-Friday 8:30am to 5:00pm, Central. I am sure they are very friendly and helpful, as the enclosed literature repeatedly states, "Please, let us help!" My husband (who is an engineer and very good at assembling things) and I worked on it on a Saturday, and it took awhile before we got everything right.

The Assembly Instructions consist of simple line diagrams, which take some good deductive and spacial skills to figure out. For me, photographs would have been very helpful, therefore I have published photographs above. The actual table is pretty simple to assemble. Then I did the buildings. You have to figure out the pieces from the line drawings. (Note to company: it would have been helpful if the parts themselves were numbered. For example, hubby put together a child's kitchen set by this company, and the parts had stickers with numbers on them.) When you are doing the buildings, please note that there are TWO kinds of screws--the larger gray-headed ones will be used for the "Large Building", but when building the "Airport" make SURE you use the smaller screws. Once you get the pieces right, it can be difficult to determine the orientation of the pieces once you have them. Some trial and error went into this. Again, photographs.

Ah, then you have the tracks themselves. Sure they are so easy to take apart and put together that a child could do it, but, seriously, there is only one way this thing can realistically go together, and if the kids want to take it apart they will end up with dead ends. You will need to pay close attention to the enclosed diagram, and be sure to keep it in a safe place, or make copies of it, so that you can refer to it when you have to put it back together. The thing is somewhat stable once together, except for the track blocks on the bridge which are intentionally left without fasteners so that they can be dumped over with the handle. Actually, we are considering gluing the main parts together for stability.

The buildings, by contrast are quite stable. I like them quite a lot, actually, especially the revolving watch tower and conveyer belt. I like the painted details on them inside and out. A little bit of paint is scratched off here and there, though.

Lastly are the million (OK, maybe just a hundred) other little parts. The train is OK. The magnets work well, and the cars have features that you can take apart and put back together. Same with the street vehicles--take apart parts. The little airplane and helicopter are pretty cool. You can move all the stuff around--cars, signs, people--even trees! This is both the advantage as well as the disadvantage of this toy. There is a small blue plastic bin that you can store parts in, which slides under the table itself. It does not slide on the runners as pictured, though, just a tad too small for that. But there is plenty of room under the table to slide other toy containers or whatever.

Basically this is a huge toy with many parts that can bring hours of imaginative play to youngsters, and I applaud them for that. It is the kind of thing that several children could enjoy together. Just be sure you set aside plenty of time to put it together and enlist the aid of a mechanically inclined person.

The twisty "slide" part in the corner is annoying impossible to assemble. We (two adults) had no issues with any other part of assembly and spent probably an hour total on assembly, including the whole table and all the tracks, minus the twisty part. Pieces were labeled for the table and with a few minutes of deduction, the buildings were ready to assemble and went together quickly. Our instructions listed which screws to use (either 5/8" or 7/8").

Now for the twisty part. The three track pieces are PLASTIC, not wood. They do fit together just fine, if alone. When you try to connect them to the connecting wood pieces it's nearly impossible to get them to fit. If you do get them to fit, the plastic slides twist/warp in order to fit and subsequently pop out of the support towers. We finally swapped two of the wood pieces leading from the large bridge, and removed 2 of the 3 semi-circles that go to the twisty slide and we now just have a sloped curve that still works with the table. Like the previous review, we spent nearly two hours just on the slide and finally surrendered to our new setup.

We specifically picked this table because of the curly part and if it wouldn't be a bear to disassemble and repackage, we'd return it and get something else.

Overall, we are happy with it, but without the curly part it's sort of blah and has no unusually fun parts compared to other tables.

Buy KidKraft Rising City Train Table And Set Now

I expected the train set to take some time to construct, but I was not expecting the cars to have as much difficulty moving around the tracks.We pushed the cars at different stages and tried to attach long trains together, but they easily derailed around several turns.I thought it would be a problem, but my nephew was extremely careful and didn't seem to notice the poor craftsmanship.There are nicer models available with better equipment, and if I had to do it over again I would go that route.

Read Best Reviews of KidKraft Rising City Train Table And Set Here

This is a wonderful educational toy for boys and girls! We love that it comes with all the little pieces like trains, cars, helicopter, people, trees etc. The only thing we really dislike is the plastic spiral. It looks great in the picture but these plastic tracks won't stay in place. We tried to screw them together but still no luck! It's not only frustrating to us but to our kids as well! I do not recommend it to anyone you will find a better train set table here on Amazon!

Want KidKraft Rising City Train Table And Set Discount?

I have spent hours putting together this train table. Because some of the tracks are plastic (the curved portion), it does not fit together properly.I also had to spend time labeling the numbers for each track.Piece "C" is similar to "D" and so forth so unless you number and label each track with a pen, it's going to be difficult for you to put back together every time your child takes it apart.I also noticed that the pieces on the table itself don't line up exactly.I have only had this table one week and the painted faces on the little men are already wearing off!I mean, couldn't they have varnished the pieces to prevent this.Kid kraft really needs to label their parts!The instruction manual isn't enough.A lot of work for me, just so my son can have fun. I also suggest that you buy additional trains (like from the wooden thomas set) and another helicopter.My son has fun because I added little extras to the set.

0 comments:

Post a Comment